「ボリューム「myvg/vol01」はローカルでアクティブではありません」 – CentOS/RHEL

問題

論理ボリュームを作成しようとすると、ボリューム グループがアクティブであっても、lvcreate はエラー「ボリューム "myvg/vol01" はローカルでアクティブではありません」で失敗し、次のようなエラー出力が表示されます:

[root@ ~]# lvcreate -L 4G myvg
Volume "myvg/vol01" is not active locally.
Aborting. Failed to wipe start of new LV.

「volume_list」は lvm.conf ファイルでコメントアウトされており、「ボリューム グループ」は volume_list に追加されていません。

物理ボリュームとボリューム グループが正常に作成されました:

[root@ ~]# pvcreate /dev/sdc1
Physical volume "/dev/sdc1" successfully created

[root@ ~]# vgcreate myvg /dev/sdc1
Volume group "myvg" successfully created

「volume_list」が変更され、追加されたボリューム グループはありません:

[root@ ~]# cat /etc/lvm/lvm.conf | grep -i "volume_list"

# it is auto-activated. The auto_activation_volume_list setting
# Configuration option activation/volume_list.
# or VG. See tags/hosttags. If any host tags exist but volume_list
# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Configuration option activation/auto_activation_volume_list.
# This list works like volume_list, but it is used only by
# auto-activation, must also be selected by volume_list (if defined)
# or VG. See tags/hosttags. If any host tags exist but volume_list
# auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Configuration option activation/read_only_volume_list.
# or VG. See tags/hosttags. If any host tags exist but volume_list
# read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# The rules are the same as those for volume_list.
# The rules are the same as those for auto_activation_volume_list

PV と VG が表示されます:

[root@ ~]# vgdisplay |grep -i "myvg"
VG Name myvg

[root@ ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 vg_6 lvm2 a--u 29.51g 0
/dev/sdb1 testvg lvm2 a--u 9.99g 7.99g
/dev/sdc1 myvg lvm2 a--u 4.99g 4.99g

論理ボリュームの作成中および手動で VG をアクティブ化した後のエラー:

[root@ ~]# lvcreate -L 4G myvg
Volume "myvg/vol01" is not active locally.
Aborting. Failed to wipe start of new LV.

[root@ ~]# vgchange -ay myvg
0 logical volume(s) in volume group "myvg" now active

[root@ ~]# lvcreate -L 4G myvg
Volume "myvg/vol01" is not active locally.
Aborting. Failed to wipe start of new LV.

解決策

lvm.conf のバックアップを利用し、/etc/lvm/lvm.conf の「volume_list」行に「#」コメントを付けます。 .

[root@ ~]# less /etc/lvm/lvm.conf | grep -i "volume_list"
# it is auto-activated. The auto_activation_volume_list setting
# Configuration option activation/volume_list.
# or VG. See tags/hosttags. If any host tags exist but volume_list
# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Configuration option activation/auto_activation_volume_list.
# This list works like volume_list, but it is used only by
# auto-activation, must also be selected by volume_list (if defined)
# or VG. See tags/hosttags. If any host tags exist but volume_list
# auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Configuration option activation/read_only_volume_list.
# or VG. See tags/hosttags. If any host tags exist but volume_list
# read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# The rules are the same as those for volume_list.
# The rules are the same as those for auto_activation_volume_list.

または、ボリューム グループを volume_list に追加します

[root@ ~]# less /etc/lvm/lvm.conf | grep -i "volume_list"

# it is auto-activated. The auto_activation_volume_list setting
# Configuration option activation/volume_list.
# or VG. See tags/hosttags. If any host tags exist but volume_list
# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*", "Volume Group Name" ]
# Configuration option activation/auto_activation_volume_list.
# This list works like volume_list, but it is used only by
# auto-activation, must also be selected by volume_list (if defined)
# or VG. See tags/hosttags. If any host tags exist but volume_list
# auto_activation_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# Configuration option activation/read_only_volume_list.
# or VG. See tags/hosttags. If any host tags exist but volume_list
# read_only_volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
# The rules are the same as those for volume_list.
# The rules are the same as those for auto_activation_volume_list.

「lvcreate」コマンドを実行してみてください:

[root@ ~]# lvcreate -L 4G myvg
Logical volume "vol01" created.