GNU/Linux >> Linux の 問題 >  >> Linux

ランダムな「ローカル選択による認証解除(理由:3 =deauth_leaving)」?

走っています

uname -r
4.10.6-1-ARCH

私のデルXPS13開発者版(2014)。現在、Wi-Fiに奇妙な問題があります(nm-appletでNetworkamangerを使用しています KDEの場合):

1)最も表面的なレベルで私は時々 完璧に動作します。PCを起動すると、すでにWi-Fiに接続されており、時々 いかなる方法でも接続されません(wifiは常に 同じ);

2)NMを再起動しようとしましたが、問題は解決しません。
3)ラップトップを再起動すると、再び機能する場合と機能しない場合があります。

4)nmcliを使用しようとしました

nmcli connection up My-WiFi 

それから私は観察します

dmesg
[  250.165837] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  250.255882] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[  272.004204] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[  275.432861] wlp2s0: authenticate with 00:3a:9a:32:62:d3
[  275.435513] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 1/3)
[  275.440164] wlp2s0: 00:3a:9a:32:62:d3 unexpected authentication state: alg 0 (expected 0) transact 256 (expected 2)
[  275.538092] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 2/3)
[  275.540879] wlp2s0: authenticated
[  275.544662] wlp2s0: associate with 00:3a:9a:32:62:d3 (try 1/3)
[  275.546811] wlp2s0: RX AssocResp from 00:3a:9a:32:62:d3 (capab=0x431 status=0 aid=4)
[  275.548267] wlp2s0: associated
[  275.653364] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[  297.004547] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[  300.433810] wlp2s0: authenticate with 00:3a:9a:32:62:d3
[  300.437019] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 1/3)
[  300.438771] wlp2s0: authenticated
[  300.441086] wlp2s0: associate with 00:3a:9a:32:62:d3 (try 1/3)
[  300.443198] wlp2s0: RX AssocResp from 00:3a:9a:32:62:d3 (capab=0x431 status=0 aid=4)
[  300.444175] wlp2s0: associated
[  300.530232] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[  322.003946] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[  325.430498] wlp2s0: authenticate with 00:3a:9a:32:62:d3
[  325.433405] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 1/3)
[  325.435168] wlp2s0: authenticated
[  325.437533] wlp2s0: associate with 00:3a:9a:32:62:d3 (try 1/3)
[  325.439710] wlp2s0: RX AssocResp from 00:3a:9a:32:62:d3 (capab=0x431 status=0 aid=4)
[  325.440978] wlp2s0: associated
[  325.618536] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[  347.007641] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[  347.023798] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  347.025937] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  692.002060] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready

常に同じエラーがあります。修正方法がわかりません。次の点に注意してください:

1)私のPCは特にLinuxフライド(ubuntuで販売されていました)です

lspci -k 
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
    Subsystem: Intel Corporation Dual Band Wireless-AC 7260
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi

2)必要なサービスはすべてアクティブです

systemctl --type=service
UNIT                                                LOAD   ACTIVE SUB     DESCRIPTION                                   
dbus.service                                        loaded active running D-Bus System Message Bus                      
gssproxy.service                                    loaded active running GSSAPI Proxy Daemon                           
kmod-static-nodes.service                           loaded active exited  Create list of required static device nodes fo
lm_sensors.service                                  loaded active exited  Initialize hardware monitoring sensors        
NetworkManager.service                              loaded active running Network Manager                               
ntpd.service                                        loaded active running Network Time Service                          
polkit.service                                      loaded active running Authorization Manager                         
rtkit-daemon.service                                loaded active running RealtimeKit Scheduling Policy Service         
sddm.service                                        loaded active running Simple Desktop Display Manager                
[email protected]:intel_backlight.service loaded active exited  Load/Save Screen Backlight Brightness of backl
[email protected]:dell::kbd_backlight.service  loaded active exited  Load/Save Screen Backlight Brightness of leds:
systemd-journal-flush.service                       loaded active exited  Flush Journal to Persistent Storage           
systemd-journald.service                            loaded active running Journal Service                               
systemd-logind.service                              loaded active running Login Service                                 
systemd-random-seed.service                         loaded active exited  Load/Save Random Seed                         
systemd-remount-fs.service                          loaded active exited  Remount Root and Kernel File Systems          
systemd-sysctl.service                              loaded active exited  Apply Kernel Variables                        
systemd-tmpfiles-setup-dev.service                  loaded active exited  Create Static Device Nodes in /dev            
systemd-tmpfiles-setup.service                      loaded active exited  Create Volatile Files and Directories         
systemd-udev-trigger.service                        loaded active exited  udev Coldplug all Devices                     
systemd-udevd.service                               loaded active running udev Kernel Device Manager                    
systemd-update-utmp.service                         loaded active exited  Update UTMP about System Boot/Shutdown        
systemd-user-sessions.service                       loaded active exited  Permit User Sessions                          
udisks2.service                                     loaded active running Disk Manager                                  
upower.service                                      loaded active running Daemon for power management                   
[email protected]                                   loaded active running User Manager for UID 1000                     
wpa_supplicant.service                              loaded active running WPA supplicant 

3)USB有線のethシールドを使用すれば、問題なくNMに接続できます。

関連:F10をGnomeターミナルのアプリケーションに渡しますか?

4)wpa_supplicantにも直接接続してみました 、しかし、認証エラーのために不可能でしたしかし 問題なく接続できる場合があるため、ユーザーIDとpwdが正しいことを強調します

どうすればいいですか?

承認された回答:

NetworkManagerとwpa_supplicantの両方が実行されているようです。 Intel 9560-ac Wi-Fiカードを搭載したラップトップ(Inspiron 7590)でも同様の問題が発生しました。 wpa_supplicantをNetworkManagerに置き換えた後、問題は解決しました。その前に、私はインターネット上のすべての提案を試しましたが、成功しませんでした。

編集:問題は複数のdhcpcdクライアントでした。システムはwpa_supplicantでも安定しています。


Linux
  1. Linuxでのローカルグループアカウントの管理

  2. Apache – * .local Ssl証明書を作成しますか?

  3. Windowsローカルグループポリシー

  1. Linux でランダムなパスワードを生成する 8 つの方法

  2. Linux でのランダム UUID の生成

  3. gemをローカルフォルダにインストール

  1. Stratisを使用したLinuxでのローカルストレージの構成

  2. Windows vs Linux 現地時間?

  3. ローカル IP トラフィックを外部インターフェイスに強制する